Combat vocabulary is the working language of a wargame and it is not the same as flavour text. The words on a card or counter that actually decide an outcome are a small, closed set: attack and defence values, range bands, dice or card modifiers, morale states, terrain keywords, timing phases. Strip those out and a wargame collapses into a set of pretty pictures with no rules. Everything below treats that vocabulary as the real subject — how it is built, how it is taught, how it is priced into a game's weight and length, and where it breaks.
The words that carry rules, and the words that only carry mood
A combat term earns its place if removing it makes the rules ambiguous. "Attack value" passes that test; "veteran" only passes it if the rulebook defines what veteran changes. Designers get into trouble when they assume a word carries meaning it never defined. A counter labelled Elite with no modifier attached is decoration, and players will invent a modifier for it, usually the wrong one.
The reliable combat vocabulary splits into four groups. First, quantities: attack, defence, damage, hit points, movement allowance, range. These are numbers and should be written as numbers wherever the game's components allow, because players compare them at a glance. Second, qualities: keywords that switch a rule on or off — armoured, pinned, entrenched, out of supply. Third, relations: words describing how two pieces interact, such as engaged, adjacent, in cover from. Fourth, timing: the phase names and interrupt words that tell players when a rule fires — before firing, in response to, at the end of the melee round.
Timing vocabulary is where most rules disputes actually live, not in the numbers. Two players who agree on every stat will still argue about whether a reaction happens before or after the attack resolves. A combat vocabulary with strong quantities and weak timing words produces a game that looks simple and plays slowly, because every combat becomes a negotiation.
The limit of this: some games deliberately use loose, evocative language because the referee is meant to adjudicate. That works when one person at the table holds authority and fails badly when the game is competitive and symmetric. Choose the vocabulary to match who is deciding.
Building a combat vocabulary that survives contact with players
Start from the resolution procedure, not from the fiction. Write out the exact sequence of a single attack in plain sentences — who declares, what is compared, what is rolled or drawn, what changes as a result — and only then name each step. Names assigned after the procedure exists tend to be consistent, because each one is doing a job. Names invented first tend to overlap.
Keep one word for one concept across the whole game, including the rulebook, the cards, the player aids and the box back. If the rules say wound and the counters say damage, a meaningful share of your players will run two separate mental models and get one of them wrong. This is the cheapest fix in the whole discipline and the most commonly skipped, because the person writing the cards is rarely the person writing the rules.
Test the vocabulary by teaching, not by playing. Hand the rulebook to someone who has never seen the game and watch where they hesitate. The words they ask about are the ones that need rewriting; the words they use correctly without prompting are the ones that work. A combat system whose terms can be taught in a couple of minutes generally has a small set of primitives doing most of the work.
Watch for the two classic failure modes. Synonym drift is when the same mechanic gets three names in three places, usually because different people wrote different components. False friends are terms borrowed from other games with a slightly different meaning here — using morale to mean a defensive stat when most players expect it to mean willingness to stay in the fight. Borrowed words carry baggage and you pay for it in confusion.
The cost of getting this right is front-loaded: a vocabulary pass late in development means reprinting cards and player aids, and that is expensive. The cost of getting it wrong is paid by every player, every session, forever. Do the pass early, on paper, before anything goes to a printer.
Reading a combat system: what the vocabulary tells you before you play
You can predict how a wargame will feel from its combat vocabulary alone, without reading the full rules. Count the distinct modifiers that can apply to a single attack. A handful means a fast, swingy game where position dominates. A long list means a game of accumulation, where the player who set up more advantages before the dice rolled is the one who wins — and where a single attack can take a while to resolve.
Look at whether the vocabulary is additive or multiplicative. Additive modifiers (a bonus here, a penalty there, summed) are easy to teach and easy to compute under pressure. Multiplicative ones (doubling, halving, re-rolling) create dramatic swings and force players to track order of operations, which is exactly where timing words start to matter and where disputes cluster.
Then look at the defensive vocabulary. If defence is a single number, combat is a comparison and the game is about force concentration. If defence is a set of states — in cover, prone, dug in — then combat is about preparation, and manoeuvre before the shooting matters more than the shooting. Neither is better; they are different games, and the vocabulary announces which one you have bought.
Finally, check the vocabulary for dead terms: words defined in the glossary that no card, counter or rule ever invokes. They are a reliable sign of a system that was trimmed during development and not fully tidied afterwards. They cost the reader time and signal that the rulebook has not been proofread against the components.
The costs: weight, table time, and the price of precision
Every term you add to a combat vocabulary is a term every player must hold in mind at once, and the total is what determines whether the game gets to the table on a weeknight. Precision is not free. A game that distinguishes suppressed, pinned and broken is more expressive than one that only knows shaken, but it demands three markers, three rules and three things to remember during a firefight.
The practical trade is between vocabulary size and the number of decisions per turn. Small vocabularies support long games because the cognitive load stays low and players can plan several turns ahead. Large vocabularies support short, tense engagements where the interest comes from the interaction of many modifiers rather than from manoeuvre. Trying to have both — a big vocabulary and a long game — produces the experience most often described as "heavy", and it is heavy in a specific way: not because the decisions are hard but because the bookkeeping is.
There is a component cost too. Distinct states need distinct markers, and a combat vocabulary with many states pushes a game toward token-heavy production, which raises the price and the setup time. Games that keep the vocabulary tight can carry it on the counters themselves, with no extra pieces.
Precision also costs forgiveness. Tightly worded combat rules leave less room for a referee to rule sensibly on an edge case, and they invite rules-lawyering at exactly the moment the table is most invested in the outcome. Loose wording buys flexibility at the price of consistency. Most successful designs pick one posture and hold it throughout rather than mixing.
Teaching and learning combat terms at the table
Teach the vocabulary before the first combat, in the order the procedure runs, and teach no more than the first combat needs. A player who has been told what attack, defence and cover mean can fight one engagement; the morale and supply terms can wait until they come up. Front-loading the whole glossary is the single most common teaching mistake and it is why so many wargames never get a second session.
Put the vocabulary on the table, not in the book. A player aid that lists the modifiers in the order they apply does more for a game's accessibility than a well-written glossary, because it is consulted at the moment of need. Cards and counters that carry their own keywords — printed on the piece, not referenced by name — remove a lookup entirely.
Use consistent phrasing in the aid and the rules so that the same sentence appears in both places. A player who has read "subtract one from the attack value if the target is in cover" on the aid should find that exact wording in the rulebook, not a paraphrase. Paraphrase is where the second mental model creeps in.
For solitaire or referee-led play the calculus changes. A single player can absorb a larger vocabulary because there is no negotiation over timing, and a referee can hold edge cases in their head. The same vocabulary that is too heavy for a competitive two-player game may be perfectly comfortable in a cooperative one, where the terms are shared tools rather than contested ground.
Where combat vocabulary crosses into puzzle and logic design
The discipline of defining a closed set of terms with exact relationships is the same one that makes a logic puzzle work. A Sudoku is played on a 9×9 grid — 81 cells in 9 rows and 9 columns — divided by thicker lines into 9 boxes of 3×3 cells, and the whole puzzle is specified by a single constraint: every row, every column and every box contains the digits 1 through 9 exactly once. That is a complete combat-vocabulary-style definition: four terms (grid, row, column, box), one rule, no ambiguity, no glossary needed.
That economy is worth studying if you design combat systems. Sudoku's terms are all relations — a cell is in a row, in a column, in a box — and the rules do nothing but constrain those relations. There are no quantities, no states, no timing words, and consequently no disputes. The puzzle's difficulty comes entirely from the interaction of a tiny vocabulary with a large space of positions. A combat system built the same way — few terms, strict relations, difficulty from position rather than from modifier stacking — is the design most likely to be taught in a minute and played for years.
The comparison has limits, and it is worth being honest about them. A puzzle has no opponent and no hidden information, so it never needs words for reaction, interrupt or concealment, which are precisely the terms that cause trouble in wargames. And puzzle research is not a training regime for combat decision-making; the studies that exist look at number puzzles and cognitive function in adults aged 50 to 93, assessing 14 cognitive measures, and they tell you about puzzle solving, not about reading a battlefield. Borrow the vocabulary discipline, not the claims.
What transfers cleanly is the test: can a new player be given the terms and the constraints and then work out a correct answer without asking a question? If the answer is yes, the vocabulary is finished. If it is no, no amount of illustration, flavour text or glossary cross-referencing will rescue it — the terms themselves are still doing too little or too much, and the fix belongs in the definitions, before anything else is built on top of them.
Where combat vocabulary breaks first: the keyword that means two things
The most damaging failure isn't a missing term — it's a term that appears in two rules with two jobs, so a player who has learned the first meaning applies it to the second. You spot it during proofreading by searching the rulebook for each keyword and reading every instance in isolation; if two instances can't be swapped without changing the outcome, you have a split meaning. The usual culprit is a state word doing double duty as a modifier and a condition: pinned as a penalty to attack, then pinned as a trigger that prevents movement. Players resolve it by picking whichever reading favours them, and the argument that follows has nothing to do with the dice.
The fix is usually cheaper than it looks. Rename one instance rather than rewriting either rule, then check the components — a counter or card that already prints the old word sets your floor, because reprinting is where a vocabulary pass gets expensive. If the components are fixed, rename the rulebook side and add a one-line note in the player aid bridging the two.
The limit: games with a referee can carry a split term, because a person adjudicates on the spot. Competitive symmetric games cannot, and a split term there will surface in the first session, not the tenth.
Keyword density: how many terms a counter can carry
A counter can hold one keyword comfortably and two at a push; three or more and players stop reading the piece and start checking the aid. This is a physical constraint before it is a design one — the printed area is fixed, so every added keyword either shrinks the type or pushes the definition into a lookup. Cards have more room but the same problem in a different form: a card whose text invokes four separate keywords forces the reader to resolve four lookups mid-combat.
The workable rule is to budget keywords per piece the way you budget numbers. Give each counter one state keyword and one quantity, and let the interaction between pieces supply the complexity. A board where each piece is simple and their relations are rich plays faster than one where each piece is dense and the relations are trivial, because the first asks players to look outward and the second asks them to look up.
When a design genuinely needs dense keywords, move them off the piece. Print the state on a marker placed beside the counter rather than on the counter itself, so the base piece stays legible and the state can change without reprinting. That trade costs setup time and table space — the token-heavy production problem again — and it is the right call only when the states change often enough that players would otherwise be flipping counters constantly.

